| Issue |
E3S Web Conf.
Volume 548, 2024
X International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-X 2024)
|
|
|---|---|---|
| Article Number | 01029 | |
| Number of page(s) | 4 | |
| Section | Agritechnologies and Agritech Engineering for Sustainable Environmental Health | |
| DOI | https://doi.org/10.1051/e3sconf/202454801029 | |
| Published online | 12 July 2024 | |
Manufacturing of balanced inter-saw spacers
1 Institute of Mechanics and Seismic Stability of Structures named after M.T. Urazbaev, Academy of Sciences of the Republic of Uzbekistan, Tashkent, 100125, Uzbekistan
2 Tashkent State Agrarian University, Tashkent, 100140, Uzbekistan
* Corresponding author:davlat_mm@mail.ru
The article defibes the ways to manufacture statically balanced inter-saw spacers for fiber-cleaning and linting machines. In manufacturing steel spacers, a welded belt joint is used where the weld seam causes an imbalance of spacers. To achieve static balance in the inter-saw spacers, we create two holes of 13.2 mm diameter in single-belt spacers and 11.85 mm diameter in two-belt spacers. At that, the remaining 10 holes in both types of spacers are made with a diameter of 15 mm, which makes it possible to balance the imbalance of these inter-saw spacers. In addition, the single-belt spacer is recommended for shafts of saw blades with large diameters, and two-belt spacers - for shafts with smaller diameters.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.