| Issue |
E3S Web Conf.
Volume 548, 2024
X International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-X 2024)
|
|
|---|---|---|
| Article Number | 03004 | |
| Number of page(s) | 6 | |
| Section | Information Technologies, Automation Engineering and Digitization of Agriculture | |
| DOI | https://doi.org/10.1051/e3sconf/202454803004 | |
| Published online | 12 July 2024 | |
Methods of increasing the physical and mechanical strength of the working surface of rolling rolls
Ryazan Institute (branch) of the Moscow Polytechnic University, Ryazan, Russia
* Corresponding author: aa777aa62@yandex.ru
The article discusses the problem of rapid wear of the work rolls of a twenty-high rolling mill for plastic deformation of nitinol. The purpose of this study is a comparative analysis of hardening methods and the feasibility of their use to increase the hardness of a roller tool. As a result, a method of ion implantation of work rolls with boron and nitrogen was identified that is preferable for implementation and deeper experimental study.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.