| Issue |
E3S Web Conf.
Volume 548, 2024
X International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-X 2024)
|
|
|---|---|---|
| Article Number | 03019 | |
| Number of page(s) | 6 | |
| Section | Information Technologies, Automation Engineering and Digitization of Agriculture | |
| DOI | https://doi.org/10.1051/e3sconf/202454803019 | |
| Published online | 12 July 2024 | |
Research of the rotation frequency of the working parts of an auger cleaner
1 Bukhara Engineering Technological Institute, Bukhara, Uzbekistan
2 Urgench State University, Urgench, Uzbekistan
* Corresponding author: raxmon@mail.ru
The paper presents the results of a study of the working parts of a screw intended for transportation, drying, and cleaning of raw cotton at high productivity. The problem of the dynamics of a machine unit with a mechanism of camshafts in distribution devices of raw cotton during their storage has been solved and an analytical form of the law of changes in the technological load on the camshafts has been obtained, taking into account the results of experimental studies. An oscillogram of the camshaft at idle speed was experimentally obtained. Using the calibration of the measuring channel and the calibration coefficient was determined from the calibration graph, also used the fast Fourier transform method and converted the resulting amplitude value into current units of “ampere”, changes in the power of the electric motor of the shaft, cam, and screw for idle speed were obtained in the form of a graph and the value was determined torque of the electric motor equal to Me=0.91 N·m.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.