| Issue |
E3S Web Conf.
Volume 548, 2024
X International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-X 2024)
|
|
|---|---|---|
| Article Number | 06002 | |
| Number of page(s) | 6 | |
| Section | Agricultural Mechanization, Civil Engineering and Energetics | |
| DOI | https://doi.org/10.1051/e3sconf/202454806002 | |
| Published online | 12 July 2024 | |
Selection of optimal parameters boom lifting mechanism
Siberian Federal University, 26, Kirensky Street, Krasnoyarsk, 660074, Russia
* Corresponding author: ilyak91@yandex.ru
This document describes the calculation procedure for selecting the optimal parameters of the boom lifting mechanism in agricultural machinery. A boom lifting scheme was developed. Studies have been carried out to find the optimal values of linear dimensions and angle, at which the required value of the force developed by the drive when lifting the boom with a hydraulic cylinder of the specified dimensions will be minimal. Based on the results of the study, an algorithm was developed for solving the optimization of boom lifting parameters. An expression is obtained for the objective function of optimizing the boom lifting mechanism. Algorithm for selection of optimal parameters of lifting mechanism considering weight of boom, hydraulic cylinder and rod has been developed.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.