| Issue |
E3S Web Conf.
Volume 548, 2024
X International Conference on Advanced Agritechnologies, Environmental Engineering and Sustainable Development (AGRITECH-X 2024)
|
|
|---|---|---|
| Article Number | 06016 | |
| Number of page(s) | 6 | |
| Section | Agricultural Mechanization, Civil Engineering and Energetics | |
| DOI | https://doi.org/10.1051/e3sconf/202454806016 | |
| Published online | 12 July 2024 | |
Pressure calculation in a roller pair
1 Karshi Engineering Economics Institute, Karshi, Uzbekistan
2 Tashkent University of Architecture and Civil Engineering, Tashkent, Uzbekistan
* Corresponding author: nuriddin.annayev.91@mail.ru
As a result of studies on force interaction in a roller pair, a calculation formula was obtained for the specific pressure in a roller pair, for the case when the material being processed is elastically viscous and the rollers are drive. Analysis of the calculation formula showed that the specific pressure in the roller pair depends on the geometric parameters of the material being processed and the roller coating, the viscosity coefficient of the material being processed, and the strain rates of contacting bodies. A formula was obtained to determine the value of the strain coefficient of the processed material under recovery, providing conditions for conjugating strains in the compression and recovery zones.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.